LapizBlue
W
— Brand

WEBER

Saint-Gobain brand. Full-range building chemicals with strong regional presence (Sodamco Weber).

— products we carry
38
across 7 categories

Tile Adhesives

— 6
All brands in Adhesives
C1

Ready-mix cement-based tile adhesive for internal use. Water resistant with strong bonding effect. Thixotropic, crack-resistant, non-slump.

3-7 kg/m²
C1T

Weber's basic cement-based tile adhesive (also known as webercol fix plus in some markets). Ready-mix, polymer-modified, water resistant with slip resistance.

3-5 kg/m²
C2TE

Ready-mix cement-based tile adhesive modified with redispersible polymer. Non-sagging slip-resistant with extended open time. For internal walls/floors and external floors. Can become S1-deformable when mixed with weberad 225 MB.

3-5 kg/m²
C2TE

Ready-mix cement-based high-performance polymer 'latex' modified tile adhesive for internal and external use. Strong bonding effect for large tiles or permanent humidity exposure. Low Dust technology (90% reduction).

3-5 kg/m²
C2TES1

Two-component, high-performance cementitious flexible tile adhesive (latex modified). For internal and external use in damp environments. Water resistant, S1 deformable.

3-5 kg/m²
Two-component epoxy thin-bed tile adhesive

100% reactive, solvent-free, water-cleanable, thin-bed epoxy tile adhesive. Chemical resistant, waterproof, moisture insensitive. Fast curing, non-sag formulation.

Tile Grouts

— 3
All brands in Grouts
CG2 WA

High-performance polymer-modified tile grout with non-shading colour technology. High stain resistance, anti-crack, very low water absorption. Wide range of attractive colours.

CG2 WA

High-performance, low-stain cementitious tile grout with Hydro Repell and Mould Stop technologies. Pre-mixed non-shrink grout for wet and dry areas. Ideal for swimming pools.

RG / RG2 reactive resin grout

100% reactive, 2-component epoxy tile grout and tile adhesive with easy water-cleanable properties. Chemical resistant, high strength, non-sag, stain resistant. Maintains workability after 1 hour at 40°C.

Concrete Repair & Anchoring

— 12
All brands in Concrete Repair
Mono-component micro-concrete

Durable mono-component micro concrete with selected sand and aggregates, special cement, green binders and additives. Flowable consistency for congested areas. Shrinkage-compensating for high compressive strength and durability.

Non-shrink structural cementitious grout

Ready-to-use non-shrink structural grout. Shrinkage-compensating mortar with excellent adhesion. Used where high compressive strength and shock/vibration resistance are required.

Cementitious non-shrink precision grout

Ready-to-use free-flow cementitious non-shrink precision grout made of sand, special cement and additives. Easy handling with no bleed and zero shrinkage.

Fair-face concrete repair skim paste

Pre-mixed cementitious paste for fair-face concrete. Dry pre-mixed coating based on hydraulic binders, siliceous filler, water retaining agents and admixtures. Available in white and grey.

EN 1504-3 R3/R4 structural repair mortar

Ready-to-use non-shrink thixotropic repair mortar with fiber reinforcement. Made of sand (reconstituted grain size), special cement, fibres and additives. High strength, high adhesion, compactness, non-shrinking. Applied manually or by spraying.

EN 1504-4 structural bonding epoxy

High strength, thixotropic epoxy patching and bonding paste. Two-component epoxy. Bonding agent for fresh-to-old concrete, patching, and sealant for injection-crack repair systems (used with weberep epo 650 i).

Pure epoxy chemical anchoring resin

Pure epoxy anchoring resin in cartridge. Two-component high-strength pure epoxy chemical anchoring system. Specifically for heavy loads, anchoring rebar and studs in solid concrete.

Three-component structural epoxy grout

Three-component high-flow epoxy grout: resin, hardener and specific fillers. Very resistant, waterproof, non-shrink resin grout. Fluid consistency for precision grouting/bedding.

Two-component solvent-free epoxy repair paste

Two-component solvent-free epoxy product. Specifically for repairing minor imperfections in concrete substrates and for levelling floors before application of floor coatings, self-levelling, screeds or decorative flooring.

Three-component epoxy mortar for PCT

Three-component epoxy mortar. Specifically for pile capping treatment.

Fibre-reinforced cement-lime plaster

One-coat high-bonding ready-mix plaster for lightweight blocks. Fibre-reinforced cement-lime ready-mix plaster for traditional masonry rendering.

~1.6 kg/m² per mm thickness
Pre-blended sand-cement internal plaster

Pre-blended sand-cement ready-mix plaster for internal plastering on blockwork and concrete surfaces before painting. Factory-controlled blend for consistent quality.

~1.6 kg/m² per mm thickness

Waterproofing

— 8
All brands in Waterproofing
One-component liquid-applied polyurethane membrane

One-component liquid-applied polyurethane waterproofing membrane. Creates a continuous watertight seal with excellent adhesion to concrete, metal, bitumen membranes and acrylic paints. Allows moisture vapour transmission.

~0.5 mm/layer; typical total 1.5-2 mm mm DFT per layer
Two-component flexible cementitious waterproof coating

Two-component polymer-modified cementitious waterproof coating. Powder (cements, fillers, admixtures) + liquid (resins, additives). Cures to an elastomeric, waterproof, flexible membrane suitable for potable water tanks, reservoirs, canals, tunnels.

Two-component flexible cementitious-acrylic waterproofing slurry

Flexible cement-based acrylic waterproof coating. Two-component polymer-modified slurry applied to concrete and mortar structures to prevent water infiltration. Used under interior/exterior ceramic tiles.

Rubberized bitumen emulsion

Rubberized bitumen emulsion protective coating. Dries to form a black, flexible, seamless waterproofing film. Excellent adhesion to most building substrates. Single-component, non-flammable, easy to apply.

2-2.5 m²/L per coat
SBR-modified rubberized bitumen emulsion

Ready-to-use cold-applied bitumen emulsion modified with SBR (Styrene Butadiene Rubber). Provides a tough, durable, elastic protective coating. Higher performance rubberized bitumen than RBE.

~2-2.5 m²/L per coat
Acrylic mono-component roof waterproof coating

Acrylic-based mono-component premium waterproof coating for roofs. Forms seamless durable membrane, highly flexible, UV-resistant, rain and ponded-water resistant. Used as stand-alone roof coating or topcoat.

Non-woven synthetic reinforcement fabric

Reinforcing fabric for use in combination with PU-based and cementitious waterproofing membranes. Improves strength, durability, and crack-bridging of the waterproofing system. Used at wall-floor joints, cracks, corners.

Flash-setting hydraulic plug mortar

Fast-setting hydraulic cement plugging mortar. Instantly and durably stops slight or serious water leaks. Hardens in less than 1 minute and slightly expands during setting. Can be used underwater; resists very high pressure; prevents corrosion.

Flooring Systems

— 6
All brands in Flooring
Two-component solvent-free self-smoothing epoxy coating

Two-component, very low VOC, pigmented solvent-free epoxy floor coating. Self-levelling with excellent smoothness. Heavy-duty pigmented coating for basements, warehouses, industrial factories, ground floor car parks, and traffic decks (no structural movement).

Two-component solvent-based aliphatic polyurethane topcoat

Two-component, solvent-based aliphatic isocyanate polyurethane coating. UV-stable with high durability, flexibility, and resistance to abrasion and chemicals. Used as protective topcoat over epoxy or flooring systems.

EN 13892-1 / EN 13813 / BS 8204 part 1 — semi-dry screed

Rapid-drying, ready-to-use polymer-modified hydraulic binder, shrinkage-controlled semi-dry floor screed. Improves quality, strength and drying speed over standard cement screeds. Compliant with EN 13892-1, EN 13813, BS 8204 part 1.

Polymer-modified self-levelling fine smoothing compound

Fine smoothing and low-shrinkage flooring levelling compound with fast-drying property. Fast covering (12-48 hours) with different floor finishes. For interior levelling 1-10 mm on new or existing substrates.

Polymer-modified fast-drying self-levelling cementitious underlayment

Fast-drying, low-shrinking self-levelling cementitious underlayment flooring compound. For internal smoothing and levelling 2-30 mm. Fast covering (24 hours) with all kinds of floor coverings. Alkalinity barrier >5 mm thickness.

Polymer-modified fast-drying high-strength self-levelling cementitious underlayment

Fast-drying, HIGH STRENGTH, low-shrinking self-levelling cementitious underlayment. Same thickness range as 525 FD (2-30 mm) but with higher compressive strength. Fast covering at 24 hours. Excellent for high-load areas.

Primers & Bonding

— 2
All brands in Primers
Acrylic dispersion primer for tiling

Specially formulated acrylic dispersion primer for use before tiling to improve application and adhesion of tile adhesives. Prevents over-rapid absorption of water into very absorbent substrates such as foamed concrete blocks.

Styrene acrylate dispersion primer

Styrene acrylate dispersion primer for use prior to application of screeds and self-levelling compounds (weberfloor 535 FD, smooth FD, 525 FD, etc.). Pore sealer preventing air bubbles; prolongs flow life and workability. Dilutable with water. No ammonia. Alkali-resistant.

Varies m²/L per coat (absorbency-dependent)

Sealants & Joints

— 1
All brands in Sealants
One-component polyurethane joint sealant

One-component polyurethane sealant for sealing expansion joints, construction joints, and movement joints. Moisture-curing, elastic.