LapizBlue
— Category

Concrete Repair & Anchoring

Structural (R3/R4) repair mortars, non-shrink grouts, micro-concretes, epoxy anchoring.

EN 1504-3EN 1504-6EN 1504-4
— products in this category
35
across 5 brands
EN 1504-3 / EN 1504-6 / EN 1504-9 structural micro-concrete

Pre-blended powder of selected cement, aggregates, and special additives designed to be shrinkage compensated. Forms a fluid micro-concrete for pouring/pumping into formwork without segregation. For pile cap treatment, column jacketing, and structural repair.

Varies kg/m² per mm thickness
EN 1504-3 structural micro-concrete

High-strength, shrinkage-compensated, super-flow micro-concrete. Used for structural repair where thickness and deterioration require high-flow concrete, and for grouting gaps 30-250 mm thick.

Varies kg/m² per mm thickness
EN 1504-3 R4 class structural repair mortar

Thixotropic, sulphate and chloride resistant, fibre-reinforced structural repair mortar. For repairs to new and old concrete structures subject to aggressive atmospheric conditions including chloride and sulphate attack.

1.85 kg/m² per mm of thickness
EN 1504-3 R4 class structural repair mortar

Single-component sulphate and chloride resistant, fibre-reinforced thixotropic mortar for repair of concrete. Higher strength version of T60. Suitable for new/old concrete subject to chloride and sulphate attack.

~1.9 kg/m² per mm of thickness
EN 1504-9 / EN 1504-6 compliant

Pre-blended powdered grout based on high-strength cement, graded aggregates (1.2 mm diameter) and special additives with an expansive agent. Total absence of shrinkage (ASTM C940) in the plastic phase. Very highly fluid grout for filling intricate spaces.

~2.2 kg/m² per mm thickness
Non-shrink precision grout

Pre-blended powdered grout with high-strength cement, graded aggregates and expansive agent. Very high early strength. Total absence of shrinkage in plastic phase (ASTM C940) and expansion in hardened phase (ASTM C878). For precision anchoring.

~2.0 kg/m² per mm thickness
EN 1504-3 class R2

Single-component, normal setting cementitious mortar for smoothing concrete surfaces. Protection, smoothing and levelling of concrete surface imperfections up to 2 mm in a single application. Fine-aggregate mortar with synthetic polymers.

1.2 kg/m² per mm of thickness
EN 1504-4 structural bonding

Two-component epoxy resin-based structural bonding adhesive with fine-grain aggregates. Thixotropic, applicable on vertical surfaces up to 1 cm in single layer. Hardens without shrinkage. Specifically for high temperatures (+25°C to +50°C).

ETA Option 1

Two-component pure epoxy resin chemical anchor. Certified for threaded bar and rebar in rough or smooth (core-drilled) holes in all types of building materials. Certified for seismic loads (C1 and C2 classes). Suitable for damp/wet/underwater holes.

EN 1504-6

Three-component, multi-purpose fluid epoxy resin grout with selected well-graded aggregates. Free flowing, specifically developed for heavy-duty structural support under static and dynamic loads.

2.2 kg/m² per mm of thickness
EN 1504-6 structural; impermeable epoxy grout

Three-component, castable, impermeable epoxy grout for pile cap treatment (PCT). Specifically for treatment of pile heads with Mapeplan range of synthetic membranes and other waterproofing materials.

2.2 kg/m² per mm of thickness
MAPEI

EPORIP

EN 1504-4 structural bonding of concrete

Two-component solvent-free epoxy adhesive for monolithic sealing of cracks in screeds and for bonding of fresh concrete to hardened concrete (cold construction joints).

Mono-component micro-concrete

Durable mono-component micro concrete with selected sand and aggregates, special cement, green binders and additives. Flowable consistency for congested areas. Shrinkage-compensating for high compressive strength and durability.

Non-shrink structural cementitious grout

Ready-to-use non-shrink structural grout. Shrinkage-compensating mortar with excellent adhesion. Used where high compressive strength and shock/vibration resistance are required.

Cementitious non-shrink precision grout

Ready-to-use free-flow cementitious non-shrink precision grout made of sand, special cement and additives. Easy handling with no bleed and zero shrinkage.

Fair-face concrete repair skim paste

Pre-mixed cementitious paste for fair-face concrete. Dry pre-mixed coating based on hydraulic binders, siliceous filler, water retaining agents and admixtures. Available in white and grey.

EN 1504-3 R3/R4 structural repair mortar

Ready-to-use non-shrink thixotropic repair mortar with fiber reinforcement. Made of sand (reconstituted grain size), special cement, fibres and additives. High strength, high adhesion, compactness, non-shrinking. Applied manually or by spraying.

EN 1504-4 structural bonding epoxy

High strength, thixotropic epoxy patching and bonding paste. Two-component epoxy. Bonding agent for fresh-to-old concrete, patching, and sealant for injection-crack repair systems (used with weberep epo 650 i).

Pure epoxy chemical anchoring resin

Pure epoxy anchoring resin in cartridge. Two-component high-strength pure epoxy chemical anchoring system. Specifically for heavy loads, anchoring rebar and studs in solid concrete.

Three-component structural epoxy grout

Three-component high-flow epoxy grout: resin, hardener and specific fillers. Very resistant, waterproof, non-shrink resin grout. Fluid consistency for precision grouting/bedding.

Two-component solvent-free epoxy repair paste

Two-component solvent-free epoxy product. Specifically for repairing minor imperfections in concrete substrates and for levelling floors before application of floor coatings, self-levelling, screeds or decorative flooring.

Three-component epoxy mortar for PCT

Three-component epoxy mortar. Specifically for pile capping treatment.

Fibre-reinforced cement-lime plaster

One-coat high-bonding ready-mix plaster for lightweight blocks. Fibre-reinforced cement-lime ready-mix plaster for traditional masonry rendering.

~1.6 kg/m² per mm thickness
Pre-blended sand-cement internal plaster

Pre-blended sand-cement ready-mix plaster for internal plastering on blockwork and concrete surfaces before painting. Factory-controlled blend for consistent quality.

~1.6 kg/m² per mm thickness

PIDILITE / PUMA

— 1
All PIDILITE / PUMA products
Two-component epoxy repair putty

Two-component epoxy putty/repair compound. High bonding, compressive and flexural strength for horizontal, vertical and overhead jobs. Bonds fresh-to-hardened concrete, anchors engine bolts and marble to plywood. Immersible permanently in water.

Two-component epoxy repair putty

High-build epoxy bug hole filler, skim coat and general-purpose adhesive. Two-component epoxy for filling blowholes, surface crack filling, skim-coating, tank lining, bedding mortar, and anchor-bolt installation.

VETONIT / SAVETO

— 9
All VETONIT / SAVETO products
EN 1504-3 Class R4 structural repair mortar

High-strength structural repair mortar for concrete substrates. R4-class cementitious mortar for load-bearing repairs.

VETONIT / SAVETO

VETOREP CR521

EN 1504-3 Class R4 non-shrink micro-concrete

High-strength structural non-shrink self-compacting micro-concrete for deep repairs. Used with formwork for columns, beams, and voids.

VETONIT / SAVETO

VETOREP CR523

EN 1504-3 Class R1/R2 fairing coat

R1/R2 single-component cementitious fairing coat for smoothing concrete surfaces and filling surface imperfections.

~1.5 kg/m² per mm thickness
VETONIT / SAVETO

VETOREP ER350

Two-component epoxy putty / anchoring compound

Two-component epoxy-based thixotropic solvent-free putty. For repair of surface imperfections, blowhole filling, anchoring, and leveling. Smooth-buttery paste, non-slump, can be feather-edged and built up to 3 mm in single layer.

0.7 L/kg
VETONIT / SAVETO

VETONET PLS 221

GP CSII W2 cementitious plaster

Premix plaster for general concrete and masonry finishing. For internal application on block walls and rough surfaces.

VETONIT / SAVETO

VETONET PLS 222

GP CSIII W2 polymer-modified cementitious plaster

Upgraded premix plaster for smoother finish and exterior application. Polymer-modified for improved adhesion.

VETONIT / SAVETO

VETOGROUT CG510

EN 1504-6 non-shrink precision grout

Non-metallic cementitious precision grout. For accurate anchoring, base plate grouting, and machinery bedding.

VETONIT / SAVETO

VETOGROUT CG519

EN 1504-6 ultra-high-strength non-shrink grout

Ultra-high-strength non-shrink cementitious grout (>85 MPa). For heavy-duty machinery bedding, structural anchoring, and demanding grouting applications.

CT C25 F5

Premixed 30-100 mm thick cementitious screed for floor leveling and renovation. For bonded and unbonded applications.

~19 kg/m² per cm thickness