LapizBlue
— Category

Waterproofing

Cementitious (CM), acrylic (AM) and polyurethane (PU) liquid-applied membranes; bituminous systems.

EN 14891EN 1504-2
— products in this category
27
across 6 brands
CM O1 P

Two-component, high-flexibility cementitious mortar with crack-bridging >2 mm. For waterproofing balconies, terraces, bathrooms, swimming pools, water tanks, potable water structures. Applied by trowel/roller/spray.

1.6 (trowel/roller) or 2.2 (spray) kg/m² per mm thickness
CM O1 P

Two-component acrylic-modified cementitious, flexible waterproof coating easy to apply. For waterproofing balconies, terraces, and bathrooms.

~1.6 kg/m² per mm thickness
ANSI A118.10-LV and A118.12; AS/NZS 4858:2004 Class III; AS 4654.1-2012

Ready-to-use, ultra-quick-drying, flexible one-component liquid rubber membrane for internal and external waterproofing. Light blue synthetic resin paste in water dispersion. Dries in 30-50 minutes; flood-testable in 12 hours.

1.3 kg/m² per mm thickness
Synthetic reinforcement fabric

Non-woven polypropylene reinforcement fabric for use with Mapelastic Turbo and Mapelastic Smart flexible cementitious waterproofing membranes. Improves toughness, punch-resistance, elongation and crack-bridging.

One-component elastic polyurethane liquid waterproofing

One-component, elastic polyurethane waterproofing membrane in thick-liquid form for flat roofs, terraces, and balconies. Forms a seamless continuous membrane.

2.0 kg/m²
Bitumen/rubber waterproofing emulsion

Bitumen waterproofing emulsion for foundations and below-ground applications. Damp Proof Course formulation.

~3-5 m²/L per coat
Bitumen/rubber latex flexible waterproofing emulsion

Bitumen/rubber latex flexible waterproofing emulsion. Solvent-free emulsion of selected water-emulsified bitumen, rubber latex, special fillers. Flexible waterproof coating resistant to re-emulsifying after prolonged immersion in slightly acid/alkaline water.

3-5 m² per litre per coat
EN 1504-2 coating

Ready-to-use, white, high-reflectance liquid waterproofing membrane for external applications. Synthetic resin in water dispersion. Forms a continuous flexible membrane. SRI 105 (cool roof). UV-resistant.

~1.5-2.0 kg/m² (applied in 2 coats)
Osmotic

One-component osmotic mortar composed of cement-based compound, selected graded aggregates and special synthetic resins. Waterproofs even in presence of negative water pressure (up to 1 atm). Certified for potable water contact.

~1.6 kg/m² per mm thickness
Flash-setting hydraulic plug mortar

Pre-blended powder binder composed of high-strength cements and special admixtures. Ultra-fast setting hydraulic binder for blocking active water leaks ('flash set').

One-component liquid-applied polyurethane membrane

One-component liquid-applied polyurethane waterproofing membrane. Creates a continuous watertight seal with excellent adhesion to concrete, metal, bitumen membranes and acrylic paints. Allows moisture vapour transmission.

~0.5 mm/layer; typical total 1.5-2 mm mm DFT per layer
Two-component flexible cementitious waterproof coating

Two-component polymer-modified cementitious waterproof coating. Powder (cements, fillers, admixtures) + liquid (resins, additives). Cures to an elastomeric, waterproof, flexible membrane suitable for potable water tanks, reservoirs, canals, tunnels.

Two-component flexible cementitious-acrylic waterproofing slurry

Flexible cement-based acrylic waterproof coating. Two-component polymer-modified slurry applied to concrete and mortar structures to prevent water infiltration. Used under interior/exterior ceramic tiles.

Rubberized bitumen emulsion

Rubberized bitumen emulsion protective coating. Dries to form a black, flexible, seamless waterproofing film. Excellent adhesion to most building substrates. Single-component, non-flammable, easy to apply.

2-2.5 m²/L per coat
SBR-modified rubberized bitumen emulsion

Ready-to-use cold-applied bitumen emulsion modified with SBR (Styrene Butadiene Rubber). Provides a tough, durable, elastic protective coating. Higher performance rubberized bitumen than RBE.

~2-2.5 m²/L per coat
Acrylic mono-component roof waterproof coating

Acrylic-based mono-component premium waterproof coating for roofs. Forms seamless durable membrane, highly flexible, UV-resistant, rain and ponded-water resistant. Used as stand-alone roof coating or topcoat.

Non-woven synthetic reinforcement fabric

Reinforcing fabric for use in combination with PU-based and cementitious waterproofing membranes. Improves strength, durability, and crack-bridging of the waterproofing system. Used at wall-floor joints, cracks, corners.

Flash-setting hydraulic plug mortar

Fast-setting hydraulic cement plugging mortar. Instantly and durably stops slight or serious water leaks. Hardens in less than 1 minute and slightly expands during setting. Can be used underwater; resists very high pressure; prevents corrosion.

LATICRETE

AQUA BARRIER

EN 14891 CM P / ASTM D751 / EN 12390-8

Two-part polymer-modified cementitious waterproof slurry (liquid polymer + cement-based powder). Cures to a flexible elastomeric membrane. For concrete/masonry water-retaining structures, balconies, terraces, swimming pools (with AQUA BARRIER NET).

PIDILITE / PUMA

— 2
All PIDILITE / PUMA products
PIDILITE / PUMA

DR. FIXIT FASTFLEX

Flexible cementitious waterproofing

High-performance polymer-modified flexible cementitious waterproofing membrane. Two-component system for wet areas and water-retaining structures (swimming pools, water features). Potable-water-tank rated.

1.1 kg/m² per coat per mm
PIDILITE / PUMA

DR. FIXIT UNICEM 3.1

Flexible cementitious waterproofing

Two-component acrylic copolymer-based flexible cementitious waterproofing system. Crack-bridging, carbonation/chloride protection, potable-water-tank rated. For roofs, balconies, wet areas, concrete tanks.

2 kg/m² per mm thickness

VETONIT / SAVETO

— 5
All VETONIT / SAVETO products
EN 14891 CM O2 P crack-bridging cementitious membrane

Two-component flexible polymer-modified cementitious waterproof coating with unique crack-bridging characteristics even after long-term water immersion. Potable-water-approved and withstands negative hydrostatic pressure.

0.7-1.7 kg/m² per coat
VETONIT / SAVETO

VETOPROOF AZL

1K hybrid polyurethane liquid waterproofing

Single-component, cold liquid-applied waterproofing and protective coating based on hybrid polyurethane technology. Flexible, durable, UV-resistant. High solar reflectance (SRI) cool-roof white colour.

1.5-2.0 kg/m² (in 2 coats)
EN 14891 CM O2 P crack-bridging cementitious membrane

Compact 20 kg variant of Vetoproof CM745 crack-bridging cementitious waterproofing membrane. Same performance characteristics.

0.7-1.7 kg/m² per coat
VETONIT / SAVETO

VETOPROOF NWP MESH

Non-woven polypropylene reinforcement fabric

Non-woven polypropylene reinforcement mesh for waterproofing systems. Embedded between coats of cementitious or liquid membranes.

VETONIT / SAVETO

KRETESIL (COLMEF)

Crystalline / silicate-based cementitious waterproofing

Colmef-branded crystalline cementitious waterproofing system. Penetrating silicate-based formulation for positive and negative-side waterproofing.

EN 14891 CM

Two-part elastomeric cementitious waterproofing coating — acrylic-modified, flexible, crack-bridging. Suitable for water-retaining structures, drinking water tanks and tile-on-membrane systems.

3.4 kg/m²