LapizBlue
— Category

Tile Grouts

Cementitious (CG1/CG2) and reactive (RG) grouts for sealing tile joints.

EN 13888ISO 13007
— products in this category
17
across 6 brands
CG2 WA

High-performance, polymer-modified cementitious mortar with water-repellent DropEffect® technology for grouting joints up to 6 mm. Suitable for interior/exterior floors and walls.

Varies kg/m²
CG2 WA

High-performance, quick-setting, polymer-modified, Portland-cement-free cementitious grout with water-repellent DropEffect® and anti-mould BioBlock® technology. For joints 2-20 mm. Anti-efflorescence.

Varies kg/m²
RG

Two-component acid-resistant high-performance epoxy grout for grouting ceramic tiles and stone material. For joints of at least 3 mm. Also usable as an adhesive.

Varies (grouting); 2-4 kg/m² (bonding) kg/m²
CG2 WA

High-performance polymer-modified tile grout with non-shading colour technology. High stain resistance, anti-crack, very low water absorption. Wide range of attractive colours.

CG2 WA

High-performance, low-stain cementitious tile grout with Hydro Repell and Mould Stop technologies. Pre-mixed non-shrink grout for wet and dry areas. Ideal for swimming pools.

RG / RG2 reactive resin grout

100% reactive, 2-component epoxy tile grout and tile adhesive with easy water-cleanable properties. Chemical resistant, high strength, non-sag, stain resistant. Maintains workability after 1 hour at 40°C.

LATICRETE

PERMACOLOR

CG2 WA

High-performance cement grout with advanced non-shading colour-consistency technology. Fast-setting, stain-resistant, anti-efflorescence. For joints up to 12 mm wide.

LATICRETE

SPECTRALOCK

RG

High-performance epoxy grout. Stain-resistant, colour-consistent, easy to clean. Premium grout for interior and exterior tiling with uniform colour and chemical resistance. Water-cleanable during the installation window.

CG2 WA

Decorative resin-cement (hybrid Resina-cemento®) grout designed by Piero Lissoni with 50 design shades. Water-repellent, very low water absorption, high surface hardness, high resistance to common acids, and total colour uniformity. Eliminates efflorescence risk (no Portland cement).

RG

Water- and stain-proof liquid ceramic grout (epoxy-resin-based) for tile joints. High chemical and mechanical resistance. Guarantees aesthetic and functional continuity of ceramic surfaces. Water-based resin (Fugalite Bio variant is hypoallergenic; tested at University of Modena).

PIDILITE / PUMA

— 3
All PIDILITE / PUMA products
CG2 A W

Coloured cementitious grout with additives, great fineness and plasticity. For sealing joints 2 to 15 mm in all types of floor and wall tiling. Special for grouting low-porosity pieces (porcelain stoneware) and swimming pools.

Depends on joint width kg/m²
CG2 W A

Coloured water-repellent CG2 WA cementitious grout with mixed binders, anti-fungal and anti-algae bioactive technology. AQUASTOP effect for pearl water beading. For low-porosity tiles and pools.

Depends on joint width kg/m²
PIDILITE / PUMA

MORCEMCOLOR EPOXY

RG

RG reactive resin epoxy grout. Highly acid-resistant and impermeable. For pools, ponds, spas, thermal baths with saline or acid-treated water, and areas with extreme temperature fluctuations.

CG2 WA

Latex-modified single-component water-repellent cement-based tile grout with smooth finish. Class CG2 WA — for joints up to 6 mm, designed for tropical climate.

varies kg/m²
CG2 WAF

High-performance, quick-dry, anti-bacterial, anti-fungus, water-repellent latex-modified cementitious tile grout. Class CG2 WAF — for joints from 2 to 20 mm.

varies kg/m²
RG

High-performance two-component epoxy-based coloured tile grout. Class RG — chemical-resistant, hygienic, non-shrink, for joints from 3 to 10 mm.

varies kg/m²
RG

Two-component water-cleanable chemical-resistant epoxy tile grout. Class RG — hygienic, low-odour, for joints from 2 to 10 mm.

varies kg/m²