LapizBlue
— Category

Primers & Bonding

Acrylic, epoxy and polyurethane primers, bonding agents and adhesion promoters.

EN 1504-4EMICODE EC1
— products in this category
15
across 6 brands
Acrylic water-dispersion primer

Synthetic resin-based primer in water dispersion. Used for treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone, and to provide even absorption before levelling.

0.1-0.2 kg/m²
Acrylic resin primer in water dispersion

Universal acrylic levelling primer for treating absorbent and non-absorbent substrates before applying skim coats, levelling compounds, or cementitious adhesives. Solvent-free, low-odour.

0.1-0.2 kg/m² (depends on dilution)
Bond-promoter primer with aggregates

Multi-purpose, ready-to-use bonding promoter primer for renders, smoothing compounds and cementitious adhesives. Synthetic resin with bond-promoting silica aggregates. Ideal for tile-on-tile installations. Odourless, solvent-free.

0.20-0.30 kg/m²
Two-component fillerized epoxy primer

Two-component epoxy primer with fillers. Specifically formulated for preliminary priming before applying Mapefloor epoxy/polyurethane resin systems and Ultratop self-levelling cementitious mortars. Radon-barrier compliant (DIN ISO/TS 11665-13).

0.25-0.70 kg/m² per coat (substrate-dependent)
Two-component solvent-free epoxy primer

Two-component, solvent-free epoxy primer used as bonding promoter for Mapefloor products, for consolidating and waterproofing against residual damp on cementitious substrates, and as anti-dust impregnator on concrete floors.

0.20-0.30 kg/m²
Acrylic dispersion primer for tiling

Specially formulated acrylic dispersion primer for use before tiling to improve application and adhesion of tile adhesives. Prevents over-rapid absorption of water into very absorbent substrates such as foamed concrete blocks.

Styrene acrylate dispersion primer

Styrene acrylate dispersion primer for use prior to application of screeds and self-levelling compounds (weberfloor 535 FD, smooth FD, 525 FD, etc.). Pore sealer preventing air bubbles; prolongs flow life and workability. Dilutable with water. No ammonia. Alkali-resistant.

Varies m²/L per coat (absorbency-dependent)
Universal bond-promoter primer with quartz filler

Rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products, plasters and renders. Quartz finish. Single-component, water-based. Active cross-link develops compatibility with absorbent AND non-absorbent substrates.

0.2-0.3 kg/m²

PIDILITE / PUMA

— 3
All PIDILITE / PUMA products
PIDILITE / PUMA

STAUF FLOORFIX D 53

CT

Self-levelling floor leveling compound for fine-finish cementitious subfloor preparation before wood/resilient flooring.

PIDILITE / PUMA

STAUF FLOORFIX D 63

CT

High-performance self-levelling floor leveling compound for heavier traffic applications and greater thickness range than D 53.

PIDILITE / PUMA

STAUF FLOORFIX VEP 93

2K epoxy primer / moisture barrier

Two-component solvent-free epoxy primer and bonding agent for flooring substrates. Moisture vapor barrier on damp concrete (above 4% RH).

VETONIT / SAVETO

— 3
All VETONIT / SAVETO products
VETONIT / SAVETO

VETOBOND PB433

Polymer

Polymer bonding admixture for cementitious repair mortars and screeds. Improves adhesion, flexibility, and water resistance.

VETONIT / SAVETO

MONNELI PRIMER AC

Water-based acrylic primer

Acrylic water-based primer (Monneli brand — sibling distribution to Saveto). For consolidating absorbent surfaces before coating or smoothing compound application.

VETONIT / SAVETO

VETOPRIME EP490 / EP491

2K solvent-free epoxy primer

Two-component solvent-free epoxy primer. EP491 as film-forming primer; EP490 as penetrating primer for epoxy floor systems.

0.25-0.40 kg/m² per coat

Multi-purpose ready-to-use bonding promoter primer for non-porous surfaces — synthetic resin with silica sand for tough mortar bond on glazed tiles, concrete, gypsum boards.

0.20-0.30 kg/m²