LapizBlue
— Category

Flooring Systems

Self-levelling compounds (CT), screeds, epoxy/PU topcoats, industrial flooring.

EN 13813EN 1504-2
— products in this category
18
across 6 brands
CT - C30 - F6 - A1FL

Pre-blended ready-to-use mortar with normal setting and controlled shrinkage, fast-drying screed. Just mix with water. For bonded, unbonded, and floating screeds, with 12-hour trafficable and 4-day fully dry cure.

~18-20 kg/m² per cm thickness
EN 13813 self-levelling compound, EC1 Plus

Self-levelling smoothing compound for interiors. For levelling and smoothing differences in thickness from 1 to 10 mm on new or existing substrates before laying all kinds of floorings.

1.6 kg/m² per mm thickness
EN 13813 self-levelling compound; EC1 R Plus

Rapid hydrating, fast-drying self-levelling compound for interiors, thicknesses 1-10 mm. For substrates requiring high resistance to loads and traffic: hospitals, hotels, theatres, schools, shopping centres.

1.6 kg/m² per mm thickness
EN 13813 self-levelling compound with high performance

Ultra-fast drying self-levelling compound for thicknesses from 3 to 40 mm per coat without shrinkage, cracking or crazing. Very high compressive and flexural strength; very low VOC.

~1.6 kg/m² per mm thickness
High-build epoxy resin floor coating

Two-component epoxy formulate with high solid content used to create multi-layered resin coatings with non-slip or roll-coat/structured finish. Durable high-build epoxy floor coating for light industries.

Two-component elastic aliphatic polyurethane topcoat

Two-component, aliphatic, elastic coloured polyurethane finish. High resistance to wear, abrasion, and UV rays. Protective topcoat for outdoor car parks, bridges, and walkways after polyurethane waterproofing.

0.2-0.5 kg/m² (depends on application method and surface)
Two-component solvent-free self-smoothing epoxy coating

Two-component, very low VOC, pigmented solvent-free epoxy floor coating. Self-levelling with excellent smoothness. Heavy-duty pigmented coating for basements, warehouses, industrial factories, ground floor car parks, and traffic decks (no structural movement).

Two-component solvent-based aliphatic polyurethane topcoat

Two-component, solvent-based aliphatic isocyanate polyurethane coating. UV-stable with high durability, flexibility, and resistance to abrasion and chemicals. Used as protective topcoat over epoxy or flooring systems.

EN 13892-1 / EN 13813 / BS 8204 part 1 — semi-dry screed

Rapid-drying, ready-to-use polymer-modified hydraulic binder, shrinkage-controlled semi-dry floor screed. Improves quality, strength and drying speed over standard cement screeds. Compliant with EN 13892-1, EN 13813, BS 8204 part 1.

Polymer-modified self-levelling fine smoothing compound

Fine smoothing and low-shrinkage flooring levelling compound with fast-drying property. Fast covering (12-48 hours) with different floor finishes. For interior levelling 1-10 mm on new or existing substrates.

Polymer-modified fast-drying self-levelling cementitious underlayment

Fast-drying, low-shrinking self-levelling cementitious underlayment flooring compound. For internal smoothing and levelling 2-30 mm. Fast covering (24 hours) with all kinds of floor coverings. Alkalinity barrier >5 mm thickness.

Polymer-modified fast-drying high-strength self-levelling cementitious underlayment

Fast-drying, HIGH STRENGTH, low-shrinking self-levelling cementitious underlayment. Same thickness range as 525 FD (2-30 mm) but with higher compressive strength. Fast covering at 24 hours. Excellent for high-load areas.

EN 13813:2002 / BS 8204-1:2003 — semi-dry polymer-modified screed

Ready-to-use polymer-modified semi-dry screeding mix. Blend of Portland cement, polymer, fibres, and graded fillers. Produces quality screed with controlled shrinkage and high mechanical strength for early installation.

PIDILITE / PUMA

— 1
All PIDILITE / PUMA products
CT C25 F5

CT C25 F5 cementitious self-levelling screed of great fluidity and normal setting. For interior self-levelling screeds 10-50 mm (bonded) or 50-100 mm (floating). Radiant heating compatible.

~1.9 kg/m² per mm thickness

VETONIT / SAVETO

— 3
All VETONIT / SAVETO products
VETONIT / SAVETO

VETOTOP CL530

CT C30 F7

Premixed 2-10 mm thick cementitious self-leveller for final floor finishing. High flowability and smooth finish.

~1.7 kg/m² per mm thickness
VETONIT / SAVETO

VETOTOP CS536

CT C25 F5

Premixed 30-100 mm thick cementitious screed for bonded and unbonded applications. Suitable for underfloor heating.

~19 kg/m² per cm thickness
VETONIT / SAVETO

VETOTOP EC498

Solvent-free 2K epoxy high-build floor coating

Solvent-free high-performance high-build epoxy floor topping. Two-component epoxy system for heavy industrial floors.

CT

Cement-based, single-component, free-flowing self-levelling thin-layer underlayment. EN 13813 — 3 to 40 mm thick (L10 grade 3-10 mm; L40 grade 5-40 mm).

1.7 kg/m²/mm