LapizBlue
M
— Brand

MAPEI

Italian leader in adhesives, sealants, and chemical products for building. Over 80 years.

— products we carry
61
across 8 categories

Tile Adhesives

— 15
All brands in Adhesives
MAPEI

MAPESET

C1

Cementitious adhesive with no vertical slip for internal and external bonding of ceramic tiles and mosaics, single-fired and double-fired tiles for floors and walls.

2-5 kg/m²
MAPEI

KERASET

C1

Dry-set mortar for interior/exterior residential and light commercial floor and wall applications. C1 classification when mixed with water.

2-5 kg/m²
C1T

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm).

2-5 kg/m²
C2E

Improved cementitious adhesive with extended open time for bonding all types of ceramic tile and mosaic on internal and external floors, walls and ceilings.

2-5 kg/m²
C2T

High-performance cementitious adhesive with no vertical slip for ceramic and porcelain tiles. Interior and exterior bonding of ceramic tiles, porcelain and mosaics.

2-5 kg/m²
C2TE

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic, vitrified and mosaic tiles, stone.

2-5 kg/m²
C2TE

High-performance cementitious adhesive for glass/ceramic/vitrified/marble mosaic and stone tiles.

2-5 kg/m²
C2TE

Cementitious adhesive with good deformability, excellent bond, high performance, extended open time and no vertical slip. Suitable for ceramic and natural stone, perfect for mosaic.

2-5 kg/m²
C2TE S1

High-performance, deformable, grey and ultra-white cementitious adhesive with no vertical slip, extended open time, and Low Dust technology. Carbon-neutral product (CO2 offset via certified carbon credits). Designed for ceramic and natural stone tiles, excellent for large-format tiles.

Varies by notch kg/m²
C2 TE S2

One-component, high-performance, highly deformable, lightweight cementitious adhesive with extended open time, Low Dust technology and extremely high yield. Specifically for large-format tiles including external facades and insulation systems.

Varies kg/m²
C2F S1

Two-component, rapid-setting cementitious adhesive for bonding ceramic tiles and stone with extraordinary bonding and fast-setting characteristics. Suitable for rapid re-tiling where flooring must be ready within short times.

Varies by notch kg/m²
R2T

Two-component high-performance polyurethane adhesive (thixotropic version) for ceramic tiles and stone. Particularly suitable for vertical applications. Essential for natural stone/agglomerates subject to movement and moisture.

2.5-5 kg/m²
R2T

Two-component, epoxy resin-based, high-strength adhesive with silica sand. Thixotropic mix for internal/external bonding of ceramic, porcelain and stone to floors and walls at thicknesses up to 1 cm in a single coat.

Varies kg/m²
D2TE

Ready-to-use, high-performance, paste tile adhesive for indoor wall tiling. Solvent-free, very low VOC emissions (EMICODE EC1 Plus).

~1.3-1.7 kg/m²
Two-component epoxy-polyurethane

Two-component epoxy-polyurethane adhesive for bonding rubber, PVC, vinyl, textile, and linoleum floor coverings. Specifically developed for rubber athletic tracks and areas under heavy mechanical stress.

~2 kg/m²

Tile Grouts

— 3
All brands in Grouts
CG2 WA

High-performance, polymer-modified cementitious mortar with water-repellent DropEffect® technology for grouting joints up to 6 mm. Suitable for interior/exterior floors and walls.

Varies kg/m²
CG2 WA

High-performance, quick-setting, polymer-modified, Portland-cement-free cementitious grout with water-repellent DropEffect® and anti-mould BioBlock® technology. For joints 2-20 mm. Anti-efflorescence.

Varies kg/m²
RG

Two-component acid-resistant high-performance epoxy grout for grouting ceramic tiles and stone material. For joints of at least 3 mm. Also usable as an adhesive.

Varies (grouting); 2-4 kg/m² (bonding) kg/m²

Concrete Repair & Anchoring

— 12
All brands in Concrete Repair
EN 1504-3 / EN 1504-6 / EN 1504-9 structural micro-concrete

Pre-blended powder of selected cement, aggregates, and special additives designed to be shrinkage compensated. Forms a fluid micro-concrete for pouring/pumping into formwork without segregation. For pile cap treatment, column jacketing, and structural repair.

Varies kg/m² per mm thickness
EN 1504-3 structural micro-concrete

High-strength, shrinkage-compensated, super-flow micro-concrete. Used for structural repair where thickness and deterioration require high-flow concrete, and for grouting gaps 30-250 mm thick.

Varies kg/m² per mm thickness
EN 1504-3 R4 class structural repair mortar

Thixotropic, sulphate and chloride resistant, fibre-reinforced structural repair mortar. For repairs to new and old concrete structures subject to aggressive atmospheric conditions including chloride and sulphate attack.

1.85 kg/m² per mm of thickness
EN 1504-3 R4 class structural repair mortar

Single-component sulphate and chloride resistant, fibre-reinforced thixotropic mortar for repair of concrete. Higher strength version of T60. Suitable for new/old concrete subject to chloride and sulphate attack.

~1.9 kg/m² per mm of thickness
EN 1504-9 / EN 1504-6 compliant

Pre-blended powdered grout based on high-strength cement, graded aggregates (1.2 mm diameter) and special additives with an expansive agent. Total absence of shrinkage (ASTM C940) in the plastic phase. Very highly fluid grout for filling intricate spaces.

~2.2 kg/m² per mm thickness
Non-shrink precision grout

Pre-blended powdered grout with high-strength cement, graded aggregates and expansive agent. Very high early strength. Total absence of shrinkage in plastic phase (ASTM C940) and expansion in hardened phase (ASTM C878). For precision anchoring.

~2.0 kg/m² per mm thickness
EN 1504-3 class R2

Single-component, normal setting cementitious mortar for smoothing concrete surfaces. Protection, smoothing and levelling of concrete surface imperfections up to 2 mm in a single application. Fine-aggregate mortar with synthetic polymers.

1.2 kg/m² per mm of thickness
EN 1504-4 structural bonding

Two-component epoxy resin-based structural bonding adhesive with fine-grain aggregates. Thixotropic, applicable on vertical surfaces up to 1 cm in single layer. Hardens without shrinkage. Specifically for high temperatures (+25°C to +50°C).

ETA Option 1

Two-component pure epoxy resin chemical anchor. Certified for threaded bar and rebar in rough or smooth (core-drilled) holes in all types of building materials. Certified for seismic loads (C1 and C2 classes). Suitable for damp/wet/underwater holes.

EN 1504-6

Three-component, multi-purpose fluid epoxy resin grout with selected well-graded aggregates. Free flowing, specifically developed for heavy-duty structural support under static and dynamic loads.

2.2 kg/m² per mm of thickness
EN 1504-6 structural; impermeable epoxy grout

Three-component, castable, impermeable epoxy grout for pile cap treatment (PCT). Specifically for treatment of pile heads with Mapeplan range of synthetic membranes and other waterproofing materials.

2.2 kg/m² per mm of thickness
MAPEI

EPORIP

EN 1504-4 structural bonding of concrete

Two-component solvent-free epoxy adhesive for monolithic sealing of cracks in screeds and for bonding of fresh concrete to hardened concrete (cold construction joints).

Waterproofing

— 10
All brands in Waterproofing
CM O1 P

Two-component, high-flexibility cementitious mortar with crack-bridging >2 mm. For waterproofing balconies, terraces, bathrooms, swimming pools, water tanks, potable water structures. Applied by trowel/roller/spray.

1.6 (trowel/roller) or 2.2 (spray) kg/m² per mm thickness
CM O1 P

Two-component acrylic-modified cementitious, flexible waterproof coating easy to apply. For waterproofing balconies, terraces, and bathrooms.

~1.6 kg/m² per mm thickness
ANSI A118.10-LV and A118.12; AS/NZS 4858:2004 Class III; AS 4654.1-2012

Ready-to-use, ultra-quick-drying, flexible one-component liquid rubber membrane for internal and external waterproofing. Light blue synthetic resin paste in water dispersion. Dries in 30-50 minutes; flood-testable in 12 hours.

1.3 kg/m² per mm thickness
Synthetic reinforcement fabric

Non-woven polypropylene reinforcement fabric for use with Mapelastic Turbo and Mapelastic Smart flexible cementitious waterproofing membranes. Improves toughness, punch-resistance, elongation and crack-bridging.

One-component elastic polyurethane liquid waterproofing

One-component, elastic polyurethane waterproofing membrane in thick-liquid form for flat roofs, terraces, and balconies. Forms a seamless continuous membrane.

2.0 kg/m²
Bitumen/rubber waterproofing emulsion

Bitumen waterproofing emulsion for foundations and below-ground applications. Damp Proof Course formulation.

~3-5 m²/L per coat
Bitumen/rubber latex flexible waterproofing emulsion

Bitumen/rubber latex flexible waterproofing emulsion. Solvent-free emulsion of selected water-emulsified bitumen, rubber latex, special fillers. Flexible waterproof coating resistant to re-emulsifying after prolonged immersion in slightly acid/alkaline water.

3-5 m² per litre per coat
EN 1504-2 coating

Ready-to-use, white, high-reflectance liquid waterproofing membrane for external applications. Synthetic resin in water dispersion. Forms a continuous flexible membrane. SRI 105 (cool roof). UV-resistant.

~1.5-2.0 kg/m² (applied in 2 coats)
Osmotic

One-component osmotic mortar composed of cement-based compound, selected graded aggregates and special synthetic resins. Waterproofs even in presence of negative water pressure (up to 1 atm). Certified for potable water contact.

~1.6 kg/m² per mm thickness
Flash-setting hydraulic plug mortar

Pre-blended powder binder composed of high-strength cements and special admixtures. Ultra-fast setting hydraulic binder for blocking active water leaks ('flash set').

Flooring Systems

— 6
All brands in Flooring
CT - C30 - F6 - A1FL

Pre-blended ready-to-use mortar with normal setting and controlled shrinkage, fast-drying screed. Just mix with water. For bonded, unbonded, and floating screeds, with 12-hour trafficable and 4-day fully dry cure.

~18-20 kg/m² per cm thickness
EN 13813 self-levelling compound, EC1 Plus

Self-levelling smoothing compound for interiors. For levelling and smoothing differences in thickness from 1 to 10 mm on new or existing substrates before laying all kinds of floorings.

1.6 kg/m² per mm thickness
EN 13813 self-levelling compound; EC1 R Plus

Rapid hydrating, fast-drying self-levelling compound for interiors, thicknesses 1-10 mm. For substrates requiring high resistance to loads and traffic: hospitals, hotels, theatres, schools, shopping centres.

1.6 kg/m² per mm thickness
EN 13813 self-levelling compound with high performance

Ultra-fast drying self-levelling compound for thicknesses from 3 to 40 mm per coat without shrinkage, cracking or crazing. Very high compressive and flexural strength; very low VOC.

~1.6 kg/m² per mm thickness
High-build epoxy resin floor coating

Two-component epoxy formulate with high solid content used to create multi-layered resin coatings with non-slip or roll-coat/structured finish. Durable high-build epoxy floor coating for light industries.

Two-component elastic aliphatic polyurethane topcoat

Two-component, aliphatic, elastic coloured polyurethane finish. High resistance to wear, abrasion, and UV rays. Protective topcoat for outdoor car parks, bridges, and walkways after polyurethane waterproofing.

0.2-0.5 kg/m² (depends on application method and surface)

Primers & Bonding

— 5
All brands in Primers
Acrylic water-dispersion primer

Synthetic resin-based primer in water dispersion. Used for treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone, and to provide even absorption before levelling.

0.1-0.2 kg/m²
Acrylic resin primer in water dispersion

Universal acrylic levelling primer for treating absorbent and non-absorbent substrates before applying skim coats, levelling compounds, or cementitious adhesives. Solvent-free, low-odour.

0.1-0.2 kg/m² (depends on dilution)
Bond-promoter primer with aggregates

Multi-purpose, ready-to-use bonding promoter primer for renders, smoothing compounds and cementitious adhesives. Synthetic resin with bond-promoting silica aggregates. Ideal for tile-on-tile installations. Odourless, solvent-free.

0.20-0.30 kg/m²
Two-component fillerized epoxy primer

Two-component epoxy primer with fillers. Specifically formulated for preliminary priming before applying Mapefloor epoxy/polyurethane resin systems and Ultratop self-levelling cementitious mortars. Radon-barrier compliant (DIN ISO/TS 11665-13).

0.25-0.70 kg/m² per coat (substrate-dependent)
Two-component solvent-free epoxy primer

Two-component, solvent-free epoxy primer used as bonding promoter for Mapefloor products, for consolidating and waterproofing against residual damp on cementitious substrates, and as anti-dust impregnator on concrete floors.

0.20-0.30 kg/m²

Sealants & Joints

— 2
All brands in Sealants
Low-modulus elastic polyurethane sealant

Low-modulus elastic polyurethane sealant specifically developed for sealing internal and external vertical expansion and construction joints. One-component moisture-curing.

ISO 11600 class F-20 HM

One-component, thixotropic, rapid-hardening paintable polyurethane sealant and adhesive with high modulus of elasticity. Dual-purpose: joint sealant AND flexible bonding adhesive. Solvent-free.

Specialty Adhesives

— 8
All brands in Specialty
Water-dispersion vinyl floor adhesive

Adhesive in water dispersion with strong and quick initial bond, long open time and very low VOC, specifically for vinyl floors.

0.25-0.35 kg/m²
Acrylic water-dispersion carpet adhesive

Non-flammable carpet adhesive — acrylic water-dispersion adhesive with long open time for textile floor coverings including carpet tiles and broadloom.

0.3-0.45 kg/m²
Water-based tackifier / pressure-sensitive adhesive

Tackifier / release adhesive for loose-lay carpet tiles and PVC tiles. Water-based dispersion with a permanent tack — tiles can be repositioned or removed.

0.08-0.15 kg/m²
Multi-purpose acrylic water-dispersion adhesive

Multi-purpose acrylic adhesive in water dispersion with long open time and very low VOC. For laying rubber, PVC, vinyl, polyolephinic, linoleum and carpet flooring.

0.25-0.5 kg/m²
One-component polyurethane turf adhesive

Fast-setting, moisture-curing, one-component, polyurethane urethane adhesive specifically designed for bonding of synthetic turf jointing strips. Meets FIFA standards for sports turf bond strength. Indoor and outdoor use.

Two-component polyurethane turf seam adhesive

Two-component, fast-set polyurethane adhesive for high-performance seaming and direct bonding of synthetic turf in athletic and landscape installations. Coloured green. Cures in 2-4 hours. Meets FIFA 2-STAR performance.

Varies m² per kit
EN 14293 'hard' class two-component polyurethane wood adhesive

Two-component, water and solvent-free polyurethane adhesive with very low VOC. 'Hard' category adhesive per EN 14293 for all types of wood/parquet flooring.

~0.8-1.2 kg/m² (trowel-dependent)
EN 14293 one-component moisture-curing polyurethane wood adhesive

Ready-to-use one-component, moisture-curing, solvent-free elastic polyurethane adhesive for pre-finished, multi-layered and traditional jointed solid wood parquet. ~30% higher yield than 2K products.

~0.7-1.0 kg/m² (trowel-dependent)